Set of Four (4) US Made Wheel Adapters
Part # USA-5100-5115-20-6-56.1
Vehicle = 5x100
Hub Bore = 56.1mm
Thickness = 20mm
Stud Size = 12x1.25
Wheel = 5x115
Quantity = 4
The center hole is 56.1 like Subaru and is too small for many vehicles.
These are Thin Adapters, You will Most likely have to trim the studs on your vehicle to use these.
If your vehicle uses bolts instead of lug nuts like many European cars they will likely have to be replaced with a conical seat fastener.
Are you sure the center bore is large enough? Does the adapter have the right size studs? Do you have enough clearance?
If you are unsure of anything please ask first,
if you purchase the wrong adapters you have to send them back for a refund -20% restocking
and then purchase another set, so, lets get the right ones the first time
for technical help call 909-890-0217
Proper installation is beyond our control and failure to properly install parts voids all warranty.
The back of your wheels must rest flat against the face of the adapter not touching the studs or lug nuts from the vehicle, these parts must be changed or trimmed if they interfere.
It is solely the responsibility of the installer to use the proper lug nuts and/or bolts, the proper torque specs, and proper mating of all surfaces for installation.
Failure to properly install your adapters may cause you to lose a wheel and void all warranties of the wheel adapter.
If you have any questions you can email or call for professional advice 909-890-0217.
Assume Nothing, if you are not sure about anything get an answer first, a lot is riding on it.